Specifications: Name: Electric Inflatable High Pressure Pump Advantages: Long working time, Long service life and Better structure Power supply: 220 V to 50 Hz Power: 8a-10a Working pressure: 0-30 Mpa Available capacity: 0 p6,8 L Speed: 2800r per min Cooling mode: water cooling Power: 1800w Compression mode: Secondary compression Weight: 17 Kg Lubrication mode: oil splash type Size: 34 Cm as37 Cm as18 Cm Working noise: 70 Db Use time: 6.8 L (45 min); 0.5 L (5 min); 0,45 L (4 min); 0,35 L (3: 40 min) Main applications: high pressure testing, bottles, automobiles. 1800W 300 Bar Electric High Pressure Pump Compressor Air Pump Hand Pump Air Pump. Name: Electric Inflatable High Pressure Pump. Advantages: Long working time, Long service life and Better structure. Power supply: 220 V to 50 Hz.
Available capacity: 0 p6,8 L. Lubrication mode: oil splash type. Size: 34 Cm as37 Cm as18 Cm. Use time: 6.8 L (45 min); 0.5 L (5 min); 0,45 L (4 min); 0,35 L (3: 40 min).
Main applications: high pressure testing, bottles, automobiles. Operation of the electric air pump. Check the amount of oil before each use. The oil should exceed the red dot, but not too much.
The Oil Exported Abroad Will Be Taken Out And Must Be Added Itself. (Very important) Change the oil cover used for transportation for a striped breathing stopper. To install the water pump, you must place the water pump in the water. The more cold water, the better.After the water pump has circulated normally, the electric air pump can be switched on. Manual shutdown After reaching the required pressure, the entire process must be observed. And it is forbidden to walk. The mechanical pressure gauge screws the pointer directly to the desired value. When the pressure rises to the set pressure after start, it stops automatically. Loosen the bleed screws on both sides before staring at the machine. Remember that the machine must start under zero pressure. If the bleed screw is not loosened, the machine will not start.
After specifying the machine, pull the bleed screws on both sides to press normally. After the end of inflating, loosen the empty screw and let the air out. Then remove the inflating joint. Press the "Set" button to set the desired pressure. When the pressure rises to the set pressure, it stops automatically.Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received.
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.