Pump Bar Used

Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078

Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078
Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078
Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078
Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078
Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078
Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078
Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078
Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078

Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078

I recently replaced my old condenser boiler and immersion heater with a combi boiler (which are fed from mains water and not from a tank), so I can no longer have this pump in the system. The shower pump with hoses was working perfectly when removed, it's just not required with new system. However, whilst removing the copper pipes from the flexible hoses one of the plastic joints grips broke. Please note this not part of the pump but on the hose. This part should be easily available from Stuart Turner or any good Plumbers merchant.

If you have an open vented system that has a minimum gravity flow of 0.6 l/min and your shower is more than 600mm, (about two rulers), below the cold water tank, then you need a positive head shower pump - so my loss could be your gain! It comes from a two person household so has many years of life left in it and is in excellent condition as shown in the pictures. Stuart Turner are well known for offering the best quality, robust to the point of'bomb proof' shower pumps on the market. Premium quality brass constructed twin pump designed for installation into an open vented system that has a minimum gravity flow of 0.6 l/min to pump both hot and cold water supplies, boosting both equally.

How to measure the gravity flow - Measuring the gravity flow from a shower head in an open vented/gravity plumbing system is easy - simply place a bucket under the shower head and using a kitchen measuring jug, measure the amount of water collected in 1 minute!! Suitable for showers or the whole house. It runs automatically when you turn the shower on and shuts off automatically when the power tap is turned off. Suitable for Gravity-Fed or vented Systems. Must not be connected directly to mains water supply. 22mm feed in and 22mm output and. Comes with 22mm fittings on flexible hoses. Please ensure the pump is primed before starting. A decent plumber will know how to install this, or if fitting yourself, call Stuart Turner, they are very helpful. Note about Positive vs Negative heads... If the shower is more than 600mm, about two rulers, below the cold water tank, then you need a positive head shower pump. If the shower is less than 600mm below the cold water tank, then you need a negative head shower pump.

Collection in person are also welcome SL3 (Slough). The item "STUART TURNER MONSOON 3.0 BAR TWIN SHOWER PUMP 46078" is in sale since Tuesday, November 2, 2021.

This item is in the category "Home, Furniture & DIY\Plumbing & Fixtures\Pumps & Water Filtration Systems\Shower Pumps". The seller is "goonders" and is located in Slough. This item can be shipped to United Kingdom.

  • Model: Monsoon 3.0 bar TWIN
  • Maximum Working Pressure: 6 bar
  • Item Height: 170mm
  • Item Width: 145mm
  • Maximum Head Lift: 34 m
  • Type: 3.0 bar Shower Pump
  • Installation: Positive Head Installation
  • Item Length: 280mm
  • Item Weight: 10 kg
  • Brand: Stuart Turner
  • Manufacturer Warranty: None
  • Maximum Flow Rate: 67 l/min


Stuart Turner Monsoon 3.0 Bar Twin Shower Pump 46078